Do you have work boots that squeak when you walk? It can be annoying and embarrassing. There are some steps that may help stop the squeaking, but it will depend on what is causing the noise. You should also look into getting new soles for your shoes to see if they are making any noise as well!
Some causes of this problem include loose nails, worn out pads or insoles, and excess moisture. If none of these fixes work, then your only option may be to replace them with a new pair of boots or shoe inserts! Which do you think is most likely at fault? Let’s take a closer look at each possible cause to find out!
Table of Contents
Why Do My Work Boots Squeak When I Walk?
It sounds like your work boots are making a noise because they’re not fitted properly.
This can happen if you buy your boots online and they don’t fit well, or if the store doesn’t have an expert to help with measurements. It could also be that the leather is dry and needs some breaking in before it’s completely silent on the other end of your walk.
If this is what happened to you at home, try wearing them around for a few hours before taking them off – that should do it! If not, make an appointment with one of our stores where we’ll take care of everything for you (fitting room visit included).
There are a few possible reasons why your work boots might be squeaking when you walk. One possibility is that the soles of the boots may not be completely flat and smooth, which can lead to a squeak when you walk. Another possibility is that there may be debris inside the boot, such as dirt or dust, which can cause a noise when you walk. Finally, it’s also possible that your foot could be making a noise inside the shoe rather than on top of it – this would happen if there was something wrong with either your heel or forefoot padding.
Your work boots may be too tight, causing them to rub against your feet
If you’re a construction worker, you know the importance of having work boots that are up to par. You need them to be tough and sturdy enough to protect your feet from all sorts of dangers onsite, but they also have to be comfortable – otherwise it’s going to be hard for you to get through a full day’s shift.
If your work boots squeak when you walk, there is probably something wrong with their fit. The most common culprits are tightness or too much space in the toe box region – so try loosening your laces or switching up brands if this is happening often!
In order for any footwear item (work boots included) to function properly, it needs an appropriate level of snugness against the foot.
The insoles of the boots could be dirty or worn out
I know the feeling of frustration and embarrassment when I walk into a meeting and hear my work boots squeak. It can be embarrassing to have to get up from the table, take off my shoes, and then put them back on just so that they’ll stop making noise.
There are several reasons why your boots may be squeaking: dirt buildup in the soles of your shoes, worn-out insoles or heels, or insufficiently tightened laces. In order for you not to worry about this happening again in another meeting, it would be wise to clean out your insoles with a wet cloth or buy new ones if needed.
The soles of the boots are wearing down and need to be replaced
Boots are designed to be durable. When the soles of boots wear down, it can create an irritating squeak when you walk. This often happens over time because your feet pushing on the ground creates friction that wears out the sole material. If this is happening to you, it’s a sign that your boot needs to be replaced! Here are some tips for how to make them last longer and get more use out of them before they need replacement:
1) Use shoe trees or other forms of foot support inside your boots overnight so they stay in shape while not being used
2) Extend their life by avoiding walking too much on rough surfaces
3) Treat leather with various types of protective substances
4) Put rubber inserts between metal parts on.
You might have different sized feet in one boot – this causes a squeaking noise when you walk
If you’re like most people, your feet might not be the same size. This can lead to some interesting problems in shoes and boots, such as when one foot is larger than the other. If you have a shoe or boot that doesn’t fit quite right or has started squeaking while you walk around – it might be because one of your feet is bigger than the other! It’s important to take care of this problem ASAP before it becomes more serious.
You might have a loose heel on one side of your boot
A common problem with work boots is that they start to squeak when you walk. This can be caused by a loose heel on one side of your boot, which will need to be tightened up before the noise goes away.
In order for the noise from your boots to go away you’ll need: One screwdriver, one wrench or pliers, and some duct tape. First take off the heel plate at the back of your boot using a screwdriver or wrench.
Next loosen both screws holding up each heel plate but don’t remove them yet – they will stay in place while you tighten them up later.
There is an issue with the way you tie your laces
If you are having problems with your work boots squeaking when you walk, it is likely because of the way that you tie your laces. There are a few different methods for tying shoelaces to help prevent this from happening. I will show you how to tie each one in order to find which works best for you.
The first method is called the “bunny ear” technique and is very simple. To do this, take both of your shoelace ends and cross them over like bunny ears on top of each other (see picture). Next, pull on the loose end on either side until they meet in the middle and then secure them together with an extra knot or bow above where they crossed (see pictures).
Check for debris inside the boots
When your feet rub against the material on the inside of your boots with each step, this can create a squeaking sound. This is especially true if there are rocks or other hard objects in them. To fix this problem, check for any loose items or pieces of dirt and remove them before wearing again.
The best way to prevent this from happening is to check for debris each time you put on your shoes, and remove anything that may be causing it. Rubbing alcohol can also be used as an alternative solution if there’s nothing in your work boots besides dirt or rocks.
Make sure you have enough space in your boots by choosing a size that fits comfortably
Do you find yourself bothered by the sound of your work boots squeaking when you walk? Do they make an annoying noise that makes it difficult to concentrate or sleep? You may be experiencing a common issue with footwear: having too little space in your work boots.
If this is the case, we recommend choosing a size that fits comfortably and ask for help from one of our experts if needed. We’re here to answer all of your questions and concerns about footwear and can provide assistance in finding the perfect fit for you!
Ensure that your laces are securely tied
Your work boots squeak as you walk because they are not laced securely. Ensure that your laces are tightly tied to provide a snug, but comfortable fit and minimize the chance of them coming undone while on the job site.
If you notice that your shoes squeak when you walk, try this: Make sure that each lace is fastened and tightened and then tie off with a double knot at the end.
Additionally, make sure there isn’t too much slack between the shoe’s tongue and its opening; if there is, tighten it up by pulling on both ends of the lace. The last thing to check for is whether or not there’s any dirt or debris in between where the two pieces meet.
Frequently Asked Questions:
How do I stop my boots from squeaking?
Go into the hardware store and get some graphite powder, which is used for lubricating things like locks, lockers, door hinges, etc., and rub it all over your shoes. For every shoe just use about a teaspoon of graphite powder with a little water to make the mixture thicker.
Rub in the graphite using circular motions around all parts of the shoe with an emphasis on places where metal touches metal (like inbetween areas that meet at points). The more you rub in this stuff-the better! You can also buy spray-serums online at lots of sporting goods stores that are specifically designed for this purpose.
How do you stop leather boots from squeaking?
Answer: 1. Find a good bag of baking soda and pour it into the shoe.
- Shake and then put your boots on and walk around in them for a while.
- When you’re done, brush the excess dirt off with an old towel or baby wipes (some people say this helps).
Pairing Diet: Baking your shoes increases fats, oils, perfume smells, bacteria and yeasts that can create odors if not cleaned regularly.(Reference) 1g of fat = 36 calories (Reference) This makes them difficult to take care of – adding more sugars/carbohydrates increases oil production even more!
How do you get shoes to stop squeaking when you walk?
- Try walking on a smooth surface like a tiled floor or metal grate and see if the squeaking stops
- Put felt pads, rubber dots, or even zip ties between your shoe’s sole and the tile to soften any hard edges that might be causing the sound.
- Walk around in your socks for a few minutes to take out any debris from last week’s adventures from inside of your shoes before donning them again
- Stuff some dryer sheets into your shoes as well-known remedies work against foot odor and adding an extra layer against excessive moisture build up which would increase potential for grinding sounds during wear
Why do my leather shoes squeak?
The leather on the inside of your shoe is rubbing against the other side. The squeak gets worse as you walk because it keeps moving, but stops if you stop walking. You can wear thicker socks to reduce this friction by making the leather more slippery.
Other options are to put a piece of felt between your shoe and sock, or create an insert for your shoes that reduces friction by absorbing moisture from sweat.
One way to prevent this problem in new shoes before they’re worn is to rub beeswax or petroleum jelly on the areas where there’s potential contact during walking.
Generally speaking, creams will make them shiny but clogs will make them duller which isn’t very noticeable unless you’re looking really closely over time.
Why do my shoes squeak on the floor?
It has been found that in addition to their chemical composition and size, the sole’s shape and hardness also affect sounds. Below is an excerpt from a study exploring footstep sound properties:
“Footstep sound properties were affected strongly by the shoe soles. Prototype shoes with thin rubbery soles made much softer footstep sounds than prototype shoes with hard leather soles.”
Within this context, you might notice that your shoes squeak more when you’re standing on hard surfaces. Of course, it’s still worth checking if there are any objects trapped between your shoe and sole plate (such as something beneath your heel.
How do you stop leather leather from squeaking?
Finishing leather with a coating is the best way to stop it from squeaking.
Finished and coated leathers contain treatments that seal and protect the outer surface of the leather, creating a water-resistant barrier between your skin and what you wear on top of the underneath layer.
But if you haven’t yet invested in such clothing, there are several cleaners available at any hardware or home supply store like WD40 (a molecule whose acronym stands for “water displacement” 40, hence its ability to dry out) that will coat and seal untreated leather in one go. What’s more is that many sprays offer an additional benefit by restoring browning, which can become tainted by proximity to things like sweat or humidity.
How do I stop the bottom of my shoes from squeaking on the floor?
Take a piece of wax paper and rub it along the bottom and back of your shoe.
Get some rubbing alcohol out and pour a little on to the bottoms of your shoes, then wipe it off with a dry cloth.
Use Ballistol, because it’s great for leather and dries quickly (so no excess gunk).
Mix up two cups hot water with one- quarter cup vinegar in a metal or glass bowl. Put this mixture into an old stocking without the foot part connected just cut open at the top to line up over your shoe. Pour boiling water into this sock until there is about three inches left showing from the top once filled just lay over shoe crossing in front if needed for better.
Conclusion:
Some people believe that your boots are designed to squeak — it might be an indication that they’re wearing down, and maybe the squeaking is intentional to indicate low tread. Other people say that heavy work boots will sometimes squeak if their sole is coming loose or worn.
If you’ve checked out your sole and there’s nothing wrong with it, please let us know! We’d like to know more about this problem so we can make sure our readers don’t experience this same thing.
You May Also Like:

The BestofWorkBoots.com team is a group of dedicated footwear enthusiasts with a collective passion for boots, shoes, and all things related to footwear. Our team is committed to providing valuable insights, practical tips, and unbiased reviews to help readers find the perfect footwear for their needs. With extensive industry knowledge and a genuine love for quality craftsmanship, our team strives to be your go-to source for expert advice on work boots and beyond. Follow our captivating articles on BestofWorkBoots.com and discover the world of footwear through the eyes of our passionate team.